NTC Inc, Telephones

Intercom Systems

AP-M Series: High-Power Intercom (Back to top)

	Expanded master with high-powered 10W output for high noise areas.
	One or two masters can be included.
	Hands free reply from remote area.
	AP-1M, AP-5M, or AP-10M master stations available, desk or wall mount.
	Use 8 ohm horn speaker for maximum output, or wall or ceiling speaker sub stations.
	Subs call master with LED and electronic tone.
	Built-in power supply.
	Special Order units for expanded capacity -- Up to 50 stations.
	Use QuikSpec to design this system.

AI-900: Integrated Intercommunication System (Back to top)

	Modular system design, allowing custom configuration based on application
	Each Main Frame supports 4 masters and 64 sub stations
	Up to 64 Main Frames tied together (64 masters, 1024 sub stations)
	Master stations feature alphanumeric display
	Analog phone with Caller-ID can be used as a master
	Indoor and outdoor stainless steel sub stations
	Emergency call sub station with control output
	Zone Paging and Group Call, up to 19 zones
	C/O Line interface
	Integrate CCTV cameras, activated with intercom calls
	Integrate selective access control with remote locations
	Calls queue at master until answered or forwarded
	Time-based, busy, or no-answer Call Forwarding
	Audio Recording output for each master station
	Sequentially monitor up to 16 sub stations
	Program and maintain entire system by on or off-site PC
	Call activity reporting output to PC

AT-406:Handset Intercom (Back to top)

	Two-way handset intercom system.
	One or two subs (AT-306) can be added.
	External signaling device can be added at each station (via TAR-3).
	DC (SKK-620) or battery (four "AA") powered with battery status indicator.
	Available in charcoal gray (AT-406B).

C-123L/A:Chime Com Door Entry (Back to top)

	Open voice door answering with door release control.
	Communication volume control.
	System automatically turns off in 15 seconds.
	Battery (4 "C") or DC (SKK-620) powered.
	Two master set available (C-123LW).
	Use QuikSpec to design this system.

CCS-1A:Chime Com2 Door Entry (Back to top)

	Press-to-talk door answering with automatic shut-off.
	Second inside room station (separate power supply required).
	Backlit CALL button.
	CHIME and VOICE volume controls.
	Powered by AC transformer PT-1210N.
	Use QuikSpec to design this system.

DA Series: Two-Wire Entry System

	Simple two wire connection for intercom and door release - Door strike wires directly to door station
	1, 2, or 4-call door stations for individual or multi-tenant applications
	Door stations are backlit, and strike is powered from main system power supply
	Vandal resistant door stations, available in silver or gray
	Extra function button on tenant station can be used to activate light at entry (Requires additional wiring)
	Call extension sounder to hear call-in at remote location

GF: Audio Only Multi-Unit Entry System (Back to top)

	Simple wiring with only 2 common wires run throughout the system.
	Fully modular flush mount entrance panels with designated number of call buttons, from 4 to 100 stations.
	Entrance panel kits available for easy designing, selling, and installation
	Up to two inside handset stations for easy communication with visitor
	Access control from inside station to calling entrance (door release)
	Optional individual doorbell to ring handset station
	Door release timer (5~20 seconds), allowing easy entry of postal or delivery workers
	QuikSpec the GF system

GF: Audio/Video Multi-Unit Entry System (Back to top)

	One to five entrance panels
	Both audio/video and audio-only entrance panels can be combined in the same system
	Flush mount modular design allows the entrance panel to have digital keypad calling and LCD display, or individual call buttons for each tenant
	Digital entrance panel kits available for easy designing, selling, and installation
	Up to two inside audio/video or audio-only stations for easy communication with visitor
	Simple wiring with only 2 sets of 2 conductor cable run in common throughout the system (Pair for audio and pair for video)
	Access control from inside station to calling entrance station (door release)
	Optional individual doorbell at each tenant's door to ring inside station (different tone)
	Door release timer (5~20 seconds), allowing easy entry of postal or delivery workers
	Program for installing Names & Numbers in GF-NS (Digital entry panel only)
	QuikSpec the GF system

IE-1AD:Chime-Tone Intercom (Back to top)

	Single room station for one door.
	Door release control.
	Chime extension speaker or relay can be added.
	AC or DC powered.
	Use QuikSpec to design this system.

IE-1GD/IE-2AD:Chime-Tone Intercom (Back to top)

	One or two audio doors, with 4-tone and 2-tone chimes.
	Up to four inside stations.
	Internal calling and communication.
	Chime tone can be muted at IEH-1CD room stations.
	Door selector button on IE-2AD.
	AC or DC powered.
	Add video with additional equipment.
	Use QuikSpec to design this system.

IE-8MD:Selective Chime-Tone Intercom (Back to top)

	One or two door stations.
	Up to 6 inside stations.
	Selective calling or All Call between room stations.
	Selective door release.
	Video door stations can be integrated, using MY series video system.
	AC or DC powered.
	Add video with additional equipment.
	Use QuikSpec to design this system.

Video Sentry PanTilt 10 Modular Audio & Video (Back to top)

	Selective Chime Tone and PanTilt Video system.
	Door answering from all inside stations, with or without video monitor.
	Selective door release control.
	Up to two PanTilt doors and one CCTV camera, or one PanTilt Door and two CCTV cameras.
	Use QuikSpec to design this system.

KB 3x5 Video:3 Video Doors 5 Monitors (Back to top)

	Up to three video door stations (KB-DAR) .
	Up to five inside stations (KB-3MRD main room station and up to four KB-3HRD sub room stations).
	Video images from door station(s) can be recorded with the KC-32EU (1 per video door station).
	Selective calling and All Call between inside stations.
	Hands free Audio and Video monitoring.
	Compact surface mount color video door station (KB-DAR).
	Adjust vertical angle of camera for better viewing.
	Illuminating LED's for low light conditions.
	Selectively release each door with adaptor (RY-3DL).
	Use the following cables only: Aiphone 871802, West Penn D990 Atlas 202-18-1-2J
	Use QuikSpec to design this system.

KC 1x3 Color Video System (Back to top)

	One video door station.
	Up to three inside stations (KC-1GRD main room station and up to two KC-1HRD sub room stations).
	Clear, crisp color image with 4" TFT display.
	Tilt control for camera adjustment.
	All Call and 2-way internal communication via handset.
	Hands free Audio and Video monitoring when door calls or when Monitor button is pressed.
	Video images from the door can be recorded using the KC-32EU.
	Illuminating LED's for low light viewing.
	Door release.
	Use QuikSpec to design this system.

KCS-1ARD 1 x 1Color Video System (Back to top)

	KCS-1ARD Set includes 1 KC-DAR door station, 1 KC-1MRD monitor, and PS-2410A power supply.
	Clear and crisp color image with 4" TFT display and Digital Signal Processor.
	Hands free Audio and Video monitoring when door calls or when Monitor button is pressed.
	Video images from door can be recorded with the KC-32EU.
	Compact surface mount color video door station (KC-DAR).
	Adjust vertical angle of camera for better viewing.
	Illuminating LED's for viewing in low light conditions.
	Door release activation from inside station.
	Use QuikSpec to design this system.

KC-32EU: Picture Memory Unit (Back to top)

	Easily added on to a new or existing system.
	Works with both color (KA, KB, KC) or Black & White (MK, MY-1CD, MY-2CD) systems.
	16, 32, or 60 single pictures saved for replay.
	16 pictures in quad view, (4 pictures taken in 2-second intervals) shown together, but can be viewed individually.
	Up to 8 pictures stored in memory (protected from being automatically erased).
	Single gang surface mounting next to main monitor.
	18 or 24V DC powered.

LAF-nC: Console System (Back to top)

	Expandable to 120 stations.
	Simple two-way communication with remotes or other master stations.
	Call tone and LED to indicate call from remote.
	Optional All Call or Background Music (requires BG-10C & PS-12F per 10 stations).
	Press-to-talk operation, or voice actuated with handset (LAF-CA models).
	Hands free communication at remote.
	Use QuikSpec to design this system.

LDC-S:Door Com System (Back to top)

	Up to 6 inside stations and 1 door station.
	2-stroke chime from the door station.
	Answer the door from any inside station.
	Listen to the door station area from any inside station.
	Speak to all inside stations simultaneously.
	Activate electric door release, or open or close a garage door from any inside station.
	Mute button to cut off station from receiving All-Call.
	Easy common wiring (7 conductors between inside stations. 8 cond. with door release).
	LE-DA flush mounted door station can be used (order equipment separately).
	LDC-S Set includes 1 LE-D Door Station, 1 ACC-3 Chime Adaptor, 3 LDC-1C Inside Stations and 1 PT-1210N Power Supply. Add 1 RY-PA Door Release Relay if necessary.

LDF-nC: Console System W/ Selective Outputs (Back to top)

	Expandable to 120 stations.
	Selective door release, corresponding to the door where communication is established (RY-PA relay for each contact).
	Selective control can provide momentary or maintained contact via separate relay (RY-PA) when integrated with any other system activated by a relay contact.
	Uses standard LE- or LS-series sub stations.
	Use QuikSpec to design this system.

LE-Bn: Multi-Unit Entry (Back to top)

	Available in 2, 4, 6, 8 or 10 button panels.
	Open voice apartment stations.
	Multiple entrances with selective door release.
	Directory panel is backlit.
	Use C-ML/A wall mount masters with built-in timing circuit.
	Use LEM-1DL/C or LEF masters for desk mount applications.

LEF Series: Selective Call Open Voice Intercom (Back to top)

	Flexible system design, intermixing any number of masters and subs to the system's capacity
	Selective calling from any master, with hands free reply from sub or responding master.
	Room monitoring from a master station.
	PanTilt video door answering can be added.
	Selective door release (LEF-5, 10 and 10S), with RY-PA relays.
	All Call (LEF-10S), door chime and background music input with BG-10C and PS-12F.
	Use QuikSpec to design this system.
	Troubleshooting FAQ's for the LEF System

LEF-3L 3-Call Master w/ Selective Contacts (Back to top)

	Intermixable - any number of masters and remotes up to 4 total locations.
	Selective door release, activating the door strike associated with the door where communication is established.
	Press-to-talk communication at initiating master. Hands free reply from remotes or responding master.
	Desk or wall mount.
	Use QuikSpec to design this system.
	Compatible with LE- or LS-series door stations.
	Troubleshooting FAQ's for the LEF System

LEF-C:Master Sentry Series (Back to top)

	Selective calling intercom system, providing door answering and internal communication, All Call, and Music throughout the system.
	3, 5, and 10-call master stations, and a variety of sub and door stations.
	Semi-flush mount style with door answering, room monitoring, privacy and selective door release (with RY-PA relays).
	All Call every station in the system and listen to music (with additional equipment).
	Use QuikSpec to design this system.
	Video door stations and monitors can be integrated.
	Troubleshooting FAQ's for the LEF System

LEF-C:With MY Series Video (Back to top)

	1, 3, or up to 10 PanTilt door stations with access control.
	Add a video monitor next to the LEF-5C or LEF-10C master stations.
	Communication with video door station through LEF intercom.
	One video door with MYW-P1L adaptor.
	Up to 3 video doors with MYW-P3L adaptor.
	Up to 10 video doors with MYW-P10L adaptor (SOP item).
	Use QuikSpec to design this system.

LEF-LD: Long Distance & Elevator System (Back to top)

	Available in 3, 5, 10, 20 station sizes.
	Systems up to 80 stations with LAF-C-LD system.
	Surface mount (LEF) or semi-flush mount (LEF-C).
	Remote stations call to master with momentary electronic tone and LED, remaining lit for 20 seconds.
	Press-to-talk communication at master, hands free at remote station.
	Flush mount (IE-JA-LD), or surface mount (IF-DA-LD) remote stations.
	Simple wiring: 3 conductors to each remote.

LEF:With MY Series Video (Back to top)

	One to three PanTilt video doors with standard adaptors.
	Up to 10 video door stations with MYW-P10L adaptor (SOP)
	Audio and video monitoring of door area with door release control.
	PanTilt control of camera from monitor.
	Additional monitors (with PS-18YC/A power supply, 1 per 2 monitors).
	Video doors up to 980' with MYW-BA adaptor and specified cable.
	Troubleshooting FAQ's for LEF/MY System
	Use QuikSpec to design this system.

LEM: Single Master System (Back to top)

	Compact surface mount master station provides open voice communication with hands free reply from sub.
	Indoor and outdoor subs call by tone (and LED with LEM-3).
	Any LE- or LS-series sub station can be used.
	Communication volume control at master station.
	Second master station can be added with DAK-2S kit.
	Troubleshooting FAQ's for LEM System
	Use QuikSpec to design this system.

LEM-1DL:Access Sentry System (Back to top)

	Open voice door answering system with door release.
	Use any LE- or LS-series sub or door station.
	Call tone and communication volume controls.
	AC (PT-1210N) or DC powered (PS-12C).
	Wall or desk mountable master station.
	Troubleshooting FAQ's for LEM System
	Use QuikSpec to design this system.

MC-60/4: MarketCom System (Back to top)

	Internal paging and 4-channel communication system.
	Up to 60 stations.
	Colored LED indicators.
	Conference call among 3 stations.
	Background music mutes after a pretone is heard to announce upcoming page.
	Pick up any handset, select channel number and talk.
	Durable call cords with reinforced modular jacks.
	Desk mount intercom is available (MC-60/4B)
	Troubleshooting FAQ's for the Market Com System
	Use QuikSpec to design this system.

MKS-1EYC:Door Sentry (Back to top)

	Boxed set with power supply included.
	Video picture memory can be added to a new or existing system with the KC-32EU.
	Add-on monitor or Audio-only station available.
	Wide-angle view 70° vertical, 90° horizontal.
	Camera angle can be upwardly adjusted by 14°.
	Call extension to each room station.
	Door strike and hands free audio/video monitoring.
	Use QuikSpec to design this system.

MP-S: Mid-Power (Back to top)

	Compact master with powerful 2.5 Watt output for higher noise areas.
	Hands free reply from remote area.
	1- or 3-call master station, desk or wall mount.
	Use 8 ohm horn speaker for maximum output.
	Subs call master with electronic tone and LED (MP-3S).

MY-1CD: Video Sentry PanTilt (Back to top)

	MYS-1DAC Set includes MK-DAC door station, MY-1CD monitor, and PS-18YC/A power supply.
	Single entry PanTilt intercom with Door Release.
	Video picture memory can be added to a new or existing system with the KC-32EU.
	Features PanTilt control pad to adjust door camera angle.
	Backlight button to compensate for strong light.
	Monitor button allows viewing of entry area.
	Use QuikSpec to design this system.
	Troubleshooting FAQ's for MY Video System

MY-2CD: Video Sentry PanTilt Plus (Back to top)

	Two PanTilt doors and up to 3 Monitor/Intercoms with one door release (Selective Door Release available with RY-3DL).
	Video picture memory can be added to a new or existing system with the KC-32EU (One required per door station).
	Handset sub station available (MY-1HD)
	Additional audio only door station may be added (IE or IF series).
	Use QuikSpec to design this system.
	Troubleshooting FAQ's for MY Video System

MY-CU-PH:Video Door With PanasonicÒ Phone (Back to top)

	One or two MK or MY-series Black & White Video Door Stations.
	Answer a visitor’s call from any telephone in the system.
	Adjust the camera’s angle with the PanTilt control.
	Listen to the outside area at any time from the phone.
	Works with Panasonic® Advanced Hybrid or Digital phone systems that use the following Doorphone adaptors: KX-TA62460 or KX-TD160.

NDR: Lamp Memory With Access & Camera Control (Back to top)

	Expandable to 120 stations.
	Built-in All Call amplifier.
	Call-in LED and tone remain until call is answered.
	Selective control of remote devices with RY-PA relay for each function.
	Door release (selective momentary contact).
	Camera call-up (selective maintained contact).
	Control of any device or system controlled by relay.
	Control of dual devices off of the same channel.
	Use QuikSpec to design this system.

NDRM: Rack Mounted Lamp Memory With Access & Camera Control (Back to top)

	12- or 20-station Rack Mount Master Panel
	20- or 40-station Add-on Panel
	Each panel occupies 3 rack spaces
	4-station expansion modules to easily add station capacity to Master or Add-on Panel
	Expandable to 100 intercom stations with All Call (Larger if All Call is not required.)
	Subs call master with LED and electronic tone.
	Simplex open voice communication
	Modular phone jack for VOX handset (included)
	Intercom channels with LED status indication (blinking for call-in and steady while communicating)
	Built-in relays for selective door release and CCTV camera activation while in communication with a remote station
	Call-in LED and tone stay on until call is answered
	One master, or dual master w/NEW-5 per 5 subs

NEM: Lamp Memory System (Back to top)

	Console master system with Lamp Memory, where call-in signal remains until answered.
	Expandable system from 10 to 40 stations with a wide assortment of accessories to meet a variety of applications.
	Push to talk or handset communication at master, hands free at sub station.
	Selective, Group or built-in All Call.
	Dual master capability with NEW-5's
	Troubleshooting FAQ's on NEM System
	Use QuikSpec to design this system.

NEM-EM: Emergency Call Intercom System (Back to top)

	Calls remain activated at master until answered.
	Emergency call indication when bath cord is pulled.
	Expandable to 80 stations.
	Room stations activate standard call-in.
	Bath cord activates a buzzer and flashing LED.
	Corridor light flashes when bath cord is activated.
	Bath cord is manually reset.
	Built-in All Call.
	Night switcher can transfer calls to a second master.

NEM-LD: Long Distance & Elevator System (Back to top)

	For communication over long distances or from a control room into elevators
	Subs can be up to 4000' away or located in elevator cabs.
	Console master system with Lamp Memory, where call-in signal remains until answered.
	Expandable to 120 stations.
	Push to talk or handset communication at master, hands free at sub station.
	Selective Call, Group Call, or built-in All Call.

NHX: Nurse Center (Back to top)

	UL 1069 Listed Nurse Call System.
	One 50-call master station, with optional 30-call add-on for up to 80 patient stations.
	Microprocessor based.
	Three levels of call-in (routine call, bathroom call & cord out call) with priority according to urgency and time of call.
	Single and dual patient stations.
	Bedside call cords, bathroom call stations, and corridor lamps.
	Common Area call stations
	Duty Station
	4-Zone indicator lamp
	Simple common wiring in groups of 10 stations
	Use QuikSpec to design this system.

RCX: Microprocessor Intercom System (Back to top)

	Duplex Microprocessor Intercom System
	Variety of sizes with 48, 88, or 128-station Central Exchange Units
	Two digit dialing on RCX-48
	Three digit dialing on RCX-88, 128
	Expand system in groups of 8 stations with XC-092 subscriber card (not included in CEU's)
	Hands free (VOX) open voice communication or handset for privacy
	Up to four paging zones, with or without talkback.
	Simple 2 twisted pair homerun wiring from CEU to each station
	Troubleshooting FAQ's on RAX/RCX Systems

TC-M: Telephone-Type (Back to top)

	10 to 60 station master.
	One or two master stations with handset sub stations.
	Simply pick up the handset sub station to call.
	Up to 10 Audio or Audio/Video door stations (single master only), with selective door release optional.
	External activation at sub station or master.
	Sub station to sub station communication through the master.
	Use QuikSpec to design this system.

TC-M: With PanTilt Video (Back to top)

	Video entry communication and PanTilt control for up to 10 door or gated entrance areas.
	Video door stations or Audio-only doors can be used.
	Automatic audio and video scanning of entry doors for up to 60 minutes, with adjustable duration of 10, 20 or 30 seconds at each door station.
	Video output to standard CCTV monitor or recording device.
	Use QuikSpec to design this system.

TCS-MH: Chime-Phone (Back to top)

	Chime Tone door answering set.
	Adjustable chime volume.
	Battery operated (4 "AA").
	Battery status indicator.

TD-H/B: Selective Call Handsets (Back to top)

	Multi-channel, selective calling handset-type system.
	Wall or desk mountable.
	Five station models, intermixable for individual system requirements.
	Up to 2 door stations (audio or audio/video), with selective door release.
	Optional paging zones, with or without talkback.
	Troubleshooting FAQ's on TD-H System
	Use QuikSpec to design this system.

TD-H/B w/PanTilt Video (Back to top)

	Add video door answering with MY-CU Monitor.
	Add up to two PanTilt doors with MYW-P3CB and MYH-CU monitor(s).
	Up to two monitors on a system with one power supply, expandable with additional power.
	Selective door release, intercom, and paging integrated into one system.
	Troubleshooting FAQ's on TD-H System
	Use QuikSpec to design this system.

TD-Z: Selective Call with Privacy (Back to top)

	Privacy intercom system with full trunkage communication.
	6- and 12-station handsets with maximum capacity of 7 or 13 stations.
	Homerun wiring to CT-Z terminal board.
	Optional paging zones (in place of handset station).

VC-M: Multi-Unit Entry System (Back to top)

	Entrance panels available in a variety of sizes: 2, 4, 6, and 10 call buttons.
	Add-on panels with 8 or 16 call buttons.
	Larger entrance panels in 26, 42, or 58 call button sizes.
	One or two entrances with selective door release. (Use VC-MW/B with two entrances.)
	Directory panel is backlit.
	Up to two handsets per apartment
	Optional external signaling (RY-PA required).
	Troubleshooting FAQ's on VC-M System
	Use QuikSpec to design this system.

YAZ: Loop-Wired Microprocessor System (Back to top)

	Microprocessor based system expandable to 90 stations.
	3 individual talk channels.
	Easy 4-twisted pair loop wiring with long distance capability (up to 1.2 miles with 22AWG wire).
	Up to 8 paging zones or remote control functions can be added.
	Additional features include 2-digit dialing, camp-on busy, call transfer and conference calling.
	Troubleshooting FAQ's on YAZ System

		\| Home \| Audio \| Video \| Telephone \| Data Systems \| Contact \| \| About \| Specials \| Client List \| What's New \|

Copyright 2006, Northeast Total Communications