Amplifiers
RMX Series
The RMX Series
amplifiers give you clean, dynamic power with the legendary QSC sound quality
and reliability that pros depend on. The RMX Series deliver unmatched
performance at a new breakthrough price. The power supply is the heart of an
amplifier, converting raw AC power from the wall to clean DC for the audio
circuitry. The RMX uses a powerful high-current toroidal transformer and ample
filter capacitance to ensure generous energy reserves. This makes a critical
difference in sound quality, allowing the amp to effortlessly punch out high
level transients, even when driving abusive 2-ohm speaker loads. RMX amplifiers
deliver true studio-quality sound. A full complementary output circuit using the
highest-grade linear output devices delivers ultra-low distortion & a
ruler-flat frequency response. SMT (Surface Mount Technology) triples
small-signal component density, enabling us to pack up to 2400 watts of power in
a chassis only 2 rack spaces & less than 16" deep. And unlike other designs, RMX
output devices are direct-mounted to the heat sink for optimum thermal coupling
& cooling.
ISA
Series
The ISA Series
features six models including three low impedance models (ISA 280, ISA 450, ISA
750) rated for 2-ohm operation, and three "T" versions with 25, 70 and 100 volt
outputs for distributed audio systems (ISA 300T, ISA 500T, ISA 800T). Versatile
loading options and a comprehensive feature set make the ISA Series a rugged,
cost-effective power solution for any permanently installed sound system.
Unique among distributed sound power amplifiers, the "T" versions will drive 8-
or 4-ohm loads and a distributed system on the same channel simultaneously. This
enables a contractor to reduce the number of required amplifier channels by
allowing a limited number of distributed speakers to be attached to the same amp
as is powering the main sound system.
QSC
CX Series
The CX Series is designed to meet the specialized needs of
sound contractors. Five low impedance models and three 70 volt direct models
have been designed from the ground up, combining QSC's exclusive PowerLight
technology with specific features to meet the requirements of fixed
installations. With high output power, versatile loading options, high thermal
capacity and reliability, the CX Series is the ideal solution to any permanently
installed sound system.The expanded eight model line now incorporates QSC's
exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V,
add direct 70 volt capability ranging from 250 watts to 1000 watts per channel
for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 are low
impedance versions ranging in power from 325 watts to 1100 watts per channel at
4 ohms
|
|
 |
|
| QSC PLX3402 Power
Amplifier |
A line of amplifiers that
defines high impact. Up to 3,400 watts in a 2 rack-unit chassis
that's only 13 in. deep and 21 lbs. It includes the exclusive
PowerWave Technology used in the award-winning PowerLightÈ Series
for chest-pounding bass and crystal-clear highs. It also features
hum-free noise floor and ultra-low distortion of .03% THD. To keep
the PLX series running under the most demanding conditions, the
Advanced Thermal Management System has been added. PLXs offer the
reliability of a company that's been building professional
amplifiers for over 30 years.
|
|
| |
|
QSC RMX1450
Power Amplifier 700 Watts |
| RMX
amplifiers deliver true studio-quality sound. A full complementary
output circuit using the highest-grade linear output devices
delivers ultra-low distortion (<0.05% THD) and a ruler-flat
frequency response. SMT (Surface Mount Technology) triples
small-signal component density, enabling us to pack up to 2400 watts
of power in a chassis only 2 rack spaces and less than 16" deep. And
unlike other designs, RMX output devices are direct-mounted to the
heat sink for optimum thermal coupling and cooling.
|
|
|
|
QSC RMX850 Power Amplifier
430 Watts |
| . The
RMX Series is packed full of professional features that increase
performance and flexibility: Independent defeatable clip limiters
reduce distortion without sacrificing peak performance. Selectable
low-frequency filters boost system response, protect speakers, and
ensure low-end tightness by more precisely matching the amplifier's
range to the loudspeakers. Barrier strip, XLR, and 1/4 in. balanced
inputs plus Speakon and binding post outputs provide easy
connections. Low-noise variable speed fans with rear-to-front air
flow keep amplifiers and racks cool.
|
|
| |
|
QSC RMX1850HD Power
Amplifier |
| The RMX Series is packed full
of professional features that increase performance and flexibility:
The RMX 1850HD provides improved thermal performance that gives you
higher continuous power in 2-ohms stereo or 4-ohms bridged
applications (a RMX 1850HD exclusive!) Independent defeatable clip
limiters reduce distortion without sacrificing peak
performance.Selectable low-frequency filters boost system response,
protect speakers, and ensure low-end tightness by more precisely
matching the amplifier's range to the loudspeakers. Barrier strip,
XLR, and 1/4 in. balanced inputs plus Speakon and binding post
outputs provide easy connections.Low-noise variable speed fans with
rear-to-front airflow keep amplifiers and racks cool.
|
|
| |
|
QSC RMX4050HD Power
Amplifier |
| Like its smaller sibling (the
RMX 1850HD), the RMX 4050HD is 1 of 2 RMX "Heavy Duty" models
designed to work as hard into 2-ohm loads as most competing
amplifiers will at 4-ohms. With a 3-tier, Class H design, the RMX
4050HD is extremely efficient at real world power levels. Less AC
current is wasted and more goes into producing useful audio power.
The RMX 4050HD accomplishes all this with a standard 15-Amp plug.
|
|
| |
|
QSC RMX2450 Power
Amplifier 1200 Watts |
| RMX amplifiers deliver
true studio-quality sound. A full, complementary output circuit
using the highest-grade linear output devices delivers ultra-low
distortion (<0.05% THD) and a ruler-flat frequency response. SMT
(Surface Mount Technology) triples small-signal component density,
enabling us to pack up to 2400 watts of power in a chassis only 2
rack spaces and less than 16 in. deep. And unlike other designs, RMX
output devices are direct-mounted to the heat sink for optimum
thermal coupling and cooling. |
|
| |
|
QSC PLX2402 Power
Amplifier |
| With PowerWave technology, the
PLX Series takes your music to a whole new level. Not only does it
deliver bigger bass and cleaner highs, PowerWave also cuts wasted
heat and boosts reliability. PowerWave is a switching power supply
that provides ample current to the audio power circuitry by charging
the supply rails 230,000 times a second through and ultra-low
impedance circuit. So unlike other amps with conventional supplies,
the audio signal is never starved prematurely and remains crisp and
clean. It virtually eliminates hum and greatly reduces noise,
providing a vast dynamic range that can handle any music without
running out of headroom.
|
|
| |
|
QSC PLX1602 Power
Amplifier |
A line of amplifiers that
defines high impact. Up to 3,400 watts in a 2 rack-unit chassis
that's only 13 in. deep and 21 lbs. It includes the exclusive
PowerWave Technology used in the award-winning PowerLightÈ Series
for chest-pounding bass and crystal-clear highs. It also features
hum-free noise floor and ultra-low distortion of .03% THD. To keep
the PLX Series running under the most demanding conditions, the
Advanced Thermal Management System has been added.
|
|
| |
|
QSC PLX3002 Power
Amplifier |
| PLX Series amplifiers offer the
reliability of a company that's been building professional
amplifiers for over 30 years. With PowerWave technology, the PLX
Series takes your music to a whole new level. The Advanced Thermal
Management system ensures PLXs run cool and reliable even under
harsh conditions. Using a high-output variable speed fan, ATM pulls
cool air from the rear of the amp and propels it through a heat
shroud precision-fitted to flow air over the heat sinks and out of
the amplifier. |
|
| |
|
QSC PLX1202
Power Amplifier |
| PLX Series
amplifiers offer the reliability of a company that's been building
professional amplifiers for over 30 years. With PowerWave
technology, the PLX Series takes your music to a whole new level.
|
|
|
Northeast Total Communication offers a wide variety of
products and manufactures.
See More
on Sound Products
