V60                         

Power Vector Modular Input Amplifier

Bogen's Power Vector modular input amplifier series offers a wide range of power from which to choose from, with five models ranging from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low-impedance (4/8-ohm) speaker systems. Each model includes eight module bays for input modules and allows up to four levels of priority between modules. Two module bays are also capable of accepting signal processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

• 5 models ranging from 35W to 250W with a large power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
• 8 input module bays
• Wide selection of advanced input modules
• 2 module bays capable of handling signal processing output modules
• 4 levels of priority between modules
• 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch
• Motorized master volume control that can be remotely operated
• Bass and treble controls
• Two-color LED for each channel indicates signal present/signal clipping
• Lockable switch permits user to select either transformer-coupled outputs or a direct low-impedance output
• 5-position barrier strip, with clamping washers, provides connections for speaker loads
• Master mute function overrides all audio from the mixer section of the amplifier
• Screw terminal for master mute and remote volume control functions
• Each of the 8 inputs is controlled by an independent volume control
• Bass and treble control bypass switch (located in module bay 6)
• 125Hz Lo-cut feature (switch located in module bay 6)
• Signal processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
• Pre-EQ unbalanced buffer output signal "post" all unit controls, but "pre" any external signal processing equipment connected
• Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
• Remote volume control panel (RVCP) (sold separately)
• Security cover to protect volume, bass, and treble controls (PVSC) (sold separately)
• Rack mountable (rack mounting kit RPK87 sold separately)
• 2 rack spaces high (3-1/2")