All processing configurations and parameters for up to thirty DP-0206 units are
set with a PC and the intuitive new DACsys 2000 control software. You can
configure systems off-line at the office, upload to the unit(s) at the job-site, and then fine-tune the parameters of each device in real time.
You can then disconnect the PC and recall different signal flow and parameter settings
from sixteen on-board memories. An innovative and time-saving Measurement Data
Import function allows audio professionals to tune crossovers and equalize
measured speaker system response files exported from SIA Smaart and Goldline TEF
software.
Hardware Overview
FEATURES
Project View
- Intuitive Project View allows access
to all processing functions, signal
flow and memories of up to 30
DP-0206 units.
- Unit Configuration Wizard for fast,
easy setup and configuration.
- Store and Recall Unit Templates
- Flexible Naming— Memories, I/O
and Units
- Group Processing Blocks within or
between Units
- Cut, Copy and Paste within or
between Units and Processing
Blocks.
- Undo/Redo
- Memory Compare
- Save/Archive to Disk for backup or
future installations.
- Print Settings for client at job completion.
- Export to Microsoft Excel for custom data
manipulation.
- Password-Protect individual processing
blocks, configurations and memories
Output Response Viewer with
SIA Smaart/Goldline TEF Data Import
- Amplitude, Phase and Group Delay of individual outputs
plus the combined (summed) output response.
- Import Measured Smaart or TEF Data for off-line
crossover tuning, alignment and equalization.
- Frequency/Level/Phase/Delay Locator
- Adjustable Graph Scaling
- Flexible Color Assignments
Data Import Sample Animation (GIF, 98 KB)
Matrix/Router
- Any Combination of Input-to-Output Signal Routing
- Store a Different Configuration in Each of Sixteen
Memories
- Individual Level Control and Polarity Inversion on Each
Crosspoint
- Graphic or Numeric Parameter Entry
- Graphic or Table Display
Level Control
- Control All Input or Output Levels from a Single
Window
- Polarity Inversion on Each Input/Output
- Multiple Input/Output Grouping with Relative Offset
- Post D/A Analog Output Attenuators ensure optimum
digital-to-analog conversion.
- Graphic or Numeric Parameter Entry
- Individual or All Output Muting
Dynamics Control
- Compressor/Limiter and Noise-Gate on Each Input
and Output
- Real-Time Metering of Compression and Gate
Activation
- Control Multiple Inputs or Outputs from One Window
- Controls:
- Compressor: Threshold, Ratio, Attack, Release and Sync
- Gate: Threshold, Attack and Release
- Graphic or Numeric Parameter Entry
Level Monitor View
- Input and Output Channel Metering
- Signal and Clip Indication
Filters / Equalization
- 12 Filters on Each Input and Output
- Filter Types:
- Parametric
- Graphic
- High and Low-Pass
- High and Low-Shelving
- All-Pass
- Notch
- Constant Directivity Horn EQ
- Graphic or Numeric Parameter Entry with Fine or
Coarse Increments
- Filter Bandwidth (Q) Display In Numeric or Fractional
Octaves
- Bypass All or Individual Filters
- Graphic or Table Display
Crossover / Channel Divider
- Crossover Types:
- Bessel (-12, -18 and -24 dB/octave)
- Butterworth (-12, -18 and -24 dB/octave)
- Linkwitz-Riley (-12 and -24 dB/octave)
- Variable-Q — allows custom crossover slopes
- Symmetrical or Asymmetrical Crossover Slopes
- Polarity Inversion
- Save Crossover Templates to create a library of
reusable speaker systems for future installations.
Driver Alignment and Output Delay
- Individual Delay (683 ms) on Each Output Channel
- Additional Driver Alignment Delay (683 ms) on Each
Crossover Channel
- Numerical Entry with Fine or Coarse Increments.
- Direct Entry and Display of Distance (inches, feet or
meters)
- Multiple Delay Grouping with Relative Offset
Temperature Calibration (ºC or ºF)
Programmable Remote Control Module
(DQ-C01)
- Simple Switch Activation (dry-contact)
- Eight Control Terminals, Assignable via Software to:
- Memory Change
- Output Volume
- Output Muting
DACsys 2000 Control Software
