EXES 6000 Exchange Peripherals

TD-600
Single Line Telephone Interface

  • Converts any two EXES station lines for use with standard DTMF telephones.
  • Provides -48 VDC battery feed and 75 VAC/16 Hz ringing voltage.
  • DTMF accessible functions include placing and receiving station calls and paging.
  • Front Panel LEDs indicate telephone off-hook condition.
  • External power supply required (24 VDC @ 250 mA)

DT-E70
Data Transmitting Unit
  • Converts control data from EXES 6000 systems to FSK serial data.
  • Used with the DR-B61 or HF-250M to enable various indication or control functions.
  • One DT-E70 supports up to 16 HF-250M stations or 50 DR-B61 units.
  • Transmits one of 16 separate data types as determined by dip switch selections.
  • Available data types include in/out annunciation, calling party indication, general purpose control and more.
  • Requires one YR-806 or YR-807 interface cable.
  • External power supply required (24 VDC @ 200 mA).

DR-B61
Data Receiving Unit
  • Converts FSK serial data from DT-E70 to relay closures.
  • Unit responds to any one of 16 DT-E70 data types as selected by dip switches.
  • Equipped with 32 normally open relay contacts.
  • Relay contact rating: 3 A @ 24 VDC max.
  • External power supply required (24 VDC @ 550 mA).


CB-600/TI-600
C/O & Tie-Line Interface


SM-600
Speech Message Unit

  • Message recording and playback system for SI-62 equipped EXES 6000 systems.

  • Record messages to be automatically played when a station is called.

  • Record a message when a called station is busy or answered.

  • Pick up messages from any system station.

  • Up to four units may be used in one system to provide 128 eight second messages.

  • Requires one YR-806 or YR-807 interface cable.

  • External power supply required (24 VDC @ 70 mA).