900 Series Line Input Modules

More Modules

  • Use "B" Series modules with transformer isolation for balanced or unbalanced sources.

  • Use "L" Series modules only for 600 ohm impedance matching.

  • Use "U" Series modules for unbalanced sources with short cables (less than 15 feet).

     
    B-01 Series
    Balanced Line Input

    For balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote equipment. Choose from two connector types: female XLR or screw terminal.


     
    B-11S
    Balanced Line Input with Mute-Receive

    For balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote equipment. Responds to mute bus activation.


     
    B-21S
    Balanced Line Input with Remote Volume Control

    For balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote equipment. Allows remote control of input signal using an external potentiometer.


     
    B-41S
    Balanced Line with Input with Mute-Send

    For balanced or unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Transformer isolation minimizes ground loop problems when connecting remote equipment. Signal at input terminals activates mute bus.


     
    L-01 Series
    Line Matching Input

    For applications requiring 600 ohm line-matching. Choose from two connector types: female XLR or screw terminal.


     
    L-11S
    Line Matching Input with Mute-Receive

    For applications requiring 600 ohm line-matching. Responds to mute bus activation.


     
    L-41S
    Line Matching Input with Mute-Send

    For applications requiring 600 ohm line-matching. Signal at input terminals activates mute bus.


     
    U-01 Series
    Unbalanced Line Input

    For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Choose from four connector types: female XLR, 1/4” phone jack, RCA pin jack or screw terminal.


     
    U-03
    Unbalanced Line Input with High/Low Cut Filters

    For unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Choose from two connector types: dual RCA jacks with passive summing or removable terminal block.


     
    U-11 Series
    Unbalanced Line Input with Mute-Receive

    For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Choose from two connector types: RCA jack or screw terminal connector.


     
    U-12S
    Unbalanced Line Input with Variable Mute-Receive Depth

    For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Responds to mute bus activation. Adjustable depth provides “ducking” rather than full muting.


     
    U-13 Series
    Unbalanced Line Input with High/Low Cut Filters and Mute-Receive

    For unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Responds to mute bus activation. Choose from two connector types: dual RCA jacks with passive summing or removable terminal block.


     
    U-21S
    Unbalanced Line Input with Remote Volume Control

    For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Allows remote control of input signal using an external potentiometer. Also configurable as master remote volume control.


     
    U-43 Series
    Unbalanced Line Input with High/Low Filters and Mute-Send

    For unbalanced, line level equipment such as AM/FM tuners, tape decks and CD players. Signal at input terminals activates mute bus. Choose from two connector types: dual RCA jacks with passive summing or removable terminal block.


     
    U-61S
    Unbalanced Line Input with Compressor

    For unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Compressor function prevents overload and distortion. Also configurable as master compressor.