More Modules
T-01S
Balanced Line Output
For transformer-isolated output of mixing bus signal to feed other
mixers, amps and tape recorders. (Functions only in A-900MK2, M-900MK2 and
W-900A Series.)
- Controls/Functions:
- Gain (Adjustable): 4 ~ 20 dB
- Max Imput/Output: +18 dB tb
- Signal to Noise (S/N): 80 dBu (S/N)
- Physical Connector: Screw Terminals
- Power (supplied by Mixer or Amp): 24 VDC / 35 mA
T-02S
Unbalanced Line Input with Music-On-Hold Output
For unbalanced, line level equipment. Transformer-isolated output of
module’s input signal for feeding remote equipment such as mixers, amps,
tape recorders and telephone system music-on-hold inputs.
- Controls/Functions:
- Input and Output Gain Controls
- Performance Input: 220 k ub
- Input Sensitivity: -18 ~ -2 dBu
- Gain (Adjustable): Input: -20 ~ 0 dB Output: 4 ~ 20 dB
- Max Input/Output: Max Input +18 dB Max Output: +18 dB tb
- Signal to Noise (S/N): Input: 90 dBu (S/N) Output: 80 dBu (S/N)
- Physical Connector:
Screw Terminals
- Power (supplied by Mixer or Amp): 24 VDC / 38 mA
T-12S
Unbalanced Line Input with Music-On-Hold Output and Input Mute-Receive
For unbalanced, line level equipment. Transformer-isolated output of
module’s input signal for feeding remote equipment such as mixers, amps,
tape recorders & telephone system music-on-hold inputs. Responds to mute bus
activation (output uninterrupted).
- Controls/Functions:
- Input and Output Gain Controls
- Mute
- Performance Input: 220 ohms
- Input Sensitivity: -18 ~ 0 dBu
- Gain (Adjustable): 4 ~ 20 dB
- Signal to Noise (S/N): 85 dBu (S/N)
- Physical Connector:
Screw Terminals
- Power (supplied by Mixer or Amp): 24 VDC / 38 mA
S-01S
1 kHz Sine Wave Test Tone
Generates 1 kHz sine wave tone via switch-closure. Ideal as a test tone
for the audio system.
- Controls/Functions:
- Level Control
- 1 kHz Sine Wave
- Performance Input: Switch Contacts
- Gain (Adjustable): Off ~ 0 dB
- Physical Connector: Screw Terminals
- Power (supplied by Mixer or Amp): 24 VDC / 7 mA
S-02S
Buzzer/Yelp Tone Generator
Generates buzzer and yelp tones via switch-closure.
- Controls/Functions:
- Level Control
- Buzzer/Yelp
- Performance Input: Switch Contacts
- Gain (Adjustable): Off ~ 0 dB
- Signal to Noise (S/N): 80 dBu
- Physical Connector: Screw Terminals
- Power (supplied by Mixer or Amp): 24 VDC / 11 mA
S-04S
Switch-Selectable Tone Generator
Generates one of eight tones via switch-closure. Can be used for
doorbell, paging, door/gate release, telephone night ringer, annunciator,
class change or pre-announcement tone.
E-03R (F-121C)
E-04R (H-1)
E-05R (H-2/H-2WP)
E-06R (H-3/H-3WP)
E-07S (FB-100 and HB-1)*
Equalization for TOA Speakers
Processor modules for TOA speakers. Connects between pre-amp output and
power amp input (Except E-07S). Includes dual RCA cable.
- Input Impedance 100k ohms, unbalanced
- Output Impedance 1k ohms, unbalanced
- Sensitivity +2.2 dBu
- Output Level +2.2 dBu
- Noise (S/N) 86 dB
- Physical Connector: Dual RCA
*The E-07S is an low-pass-filter output module with a mix bus
output to drive a dedicated external subwoofer amplifier.
